Olivetti Fax-Lab 115, Instructions Manual

Page: 24 / 64

2 2
T
O ADJUST THE CONTRAST AND RESOLUTION
Before sending a document you can make some ad-
justments so as to optimize the printing quality.
T
O ADJUST THE CONTRAST
1. Press the key
until the display shows:
FAX SET-UP
2. Press the key:
The display shows:
DATE AND TIME
3. Press the key:
The display shows:
VARIOUS SETTINGS
4. Press the key
until the display shows:
CONTRAST: NORMAL
5. To view the other available options: "DARK" and
"LIGHT", press the keys:
|
/
}
6. To confirm your choice, press the key:
7. To return the fax machine to its initial stand-by mode,
press the key:
The contrast should be regulated on the basis of the
following criteria:
• NORMAL , if the document is neither very light nor very
dark . "NORMAL" appears on the bottom line of the display.
• LIGHT , if the document is dark . "LIGHT" appears on the
bottom line of the display.
• DARK , if the document is light . "DARK" appears on the bot-
tom line of the display.
T
O ADJUST THE RESOLUTION
1. Press the key
until the desired resolution value appears on the dis-
play.
The resolution should be regulated on the basis of the
following criteria:
• STD (STANDARD), if the document contains easily legible
characters . An "arrow" appears on the bottom line of the
display in line with the " " symbol printed on the console.
• FINE , if the document contains very small characters or
drawings . An "arrow" appears on the bottom line of the dis-
play in line with the " " symbol printed on the console.
• HALF TONES , if the document contains shaded areas .
An "arrow" in line with the " " symbol and an arrow in line
with the " " symbol printed on the console appear on the
bottom line of the display.
T
O SEND A DOCUMENT
1. Insert the document in the automatic document feeder
(ADF).
The display shows on the top line:
DOCUMENT READY
and on the bottom line, the default contrast value: "NOR-
MAL".
The initial resolution value is: " " (standard).
If you want, change the contrast and resolution values
as described previously.
2. To dial the number of the correspondent to whom you
wish to send the document, press the keys:
-
Your correspondent’s number may be made up of max.
64 digits.
3. To start sending the document, press the key:
If the document is sent correctly, once this operation has
been completed, the display will show the message "TX
COMPLETED" for a few seconds.
n o t e
If you have entered any incorrect digits: move the cursor,
using the
|
/
}
keys, to the incorrect digit and overwrite it with
the correct one; if you want to delete the number altogether,
press the key.
n o t e
If you want you can dial the correspondent’s number using
the quick dialling procedures, see "
To set one-touch and
speed dialling ", " To send a document with one-touch
dialling " and " To send a document with speed dialling ".
n o t e
If you want to abort the transmission in progress , press
the key. The fax machine unloads the document from
the ADF and returns to its initial stand-by mode.
If the document to be removed consists of more than one
sheet, before pressing to unload the first, remove all
the others by hand .
T
O HEAR THE DIALLING TONE WHEN SENDING A DOCUMENT
1. Insert the document in the automatic document feeder
(ADF).
The display shows on the top line:
DOCUMENT READY
and on the bottom line, the default contrast value: NOR-
MAL.
The initial resolution value is: " " (standard).
If you want, change the contrast and resolution values
as described previously.