Olivetti d-Copia 52 Operation Manual Download Page 91

Page: 91 / 110

(3) Removal procedures

Misfeed in paper feed section

●

Misfeed in drawer

If "MISFEED IN PAPER DRAWER. REMOVE PAPER." and the misfeed location
indicator shown in the illustration appear, misfeed has occurred in the drawer.

WHEN PAPER MISFEEDS

1. Pull out the drawer currently being used (drawer indicated in the misfeed location

indicator).

2. Remove the misfed paper without tearing it.

* If the paper does tear, remove any scraps of torn paper from inside the copier.

3. Push the drawer back in firmly.

●

Misfeed in right cover

If "PAPER MISFEED. OPEN RIGHT COVER." appears, misfeed has occurred in
the right cover.

1. Open the right cover.

2. Remove the misfed paper without tearing it.

* If the paper does tear, remove any scraps of torn paper from inside the copier.

3. Close the right cover.

Summary of Contents for d-Copia 52















































































































Search results

Summary of Contents for d-Copia 52

Reviews:

Related manuals for d-Copia 52

Brands by name

Popular brands

Olivetti d-Copia 52, Operation Manual

Search results

Summary of Contents for d-Copia 52

Reviews:

Related manuals for d-Copia 52

Brands by name

Popular brands