12
PREPARATIONS
A4
A5
A
3
A4
* Set a paper size label sheet in the front of the drawer to see the paper size.
5. Gently push the drawer back in.
* Set the paper size referring "
3
PAPER SIZE" on page 78.
2
Loading paper into the deck
For the deck, A4 sheets of standard paper (80 g/m
2
) can be loaded in two rows. Up
to the 1,500 sheets each, and therefore 3,000 sheets can be loaded.
1. Pull out the deck out toward you as far as it will go.
2. Load the paper in two rows.
* A sticker indicates how high paper can be loaded. Do not exceed the limits on
the sticker.
* When loading paper into the deck, make sure the copy side is facing
downward. (The copy side is the side facing upward when the package is
opened.)
3. Gently push the deck back in.
* When the copier is out of use for a prolonged period of time, remove the paper
from the drawer(s), put it into its original packaging, and seal it, to protect it
against moisture.
3
Loading paper into the stack bypass tray
The stack bypass can hold up to 100 sheets of standard paper (80 g/m
2
) at a time.
The paper can be any size from A3 to A6R, Folio. When copying onto special
paper, always use this tray to feed the paper.
* When using custom size paper, paper size can be specified. Set the paper size in
accordance with the following procedure in the "
●
How to set the custom sizes"
on page 77.
Summary of Contents for d-Copia 52
Page 1: ...42 52 COPIER OPERATION MANUAL Cod 506509D...
Page 11: ...7 NAMES OF PARTS...
Page 110: ......
