84
MESSAGES
Action
Page
Message
Open and close the front cover. If this message does not disappear, make a note
of the "C" and numbers appearing with it, turn the main switch OFF (O), and
contact your service representative.
___
"CALL FOR SERVICE."
Periodic maintenance is necessary to keep your copier in good condition. Contact
your service representative as soon as possible.
___
"TIME FOR MAINTENANCE"
Memory is full. Select if print till the last page which has just read or clear all of the
data which has already been read. Copying or reading of another original cannot
be performed until one of these is selected.
___
"MEMORY FULL."
The defaulted paper size is not the same as the paper in the drawer. Change the
paper size by using the default setting. Copying with the wrong default setting
may lead to the paper misfeeds.
78
"PAPER IN DRAWER NOT REGISTERED
SIZE. CHECK PAPER IN DRAWER."
If paper is misfed, the copier will stop, and the location of the misfeed will be
displayed in the message display. Remove the misfed paper with the main switch
ON (
❘
) in accordance with the procedure.
86
"PAPER MISFEED."
The finisher (optional) is not installed correctly. Install it securely.
___
"FINISHER IS OUT OF ORDER.
DETACH FINISHER."
Unfinished copies were ejected into the tray of finisher (optional) due to the
problem happened during copying. Check and remove those copies.
___
"CHECK PAPER IN FINISHER.
INCOMPLETE COPIES INSIDE."
Copier is inoperable due to the problem of the finisher (optional). Contact your
service representative.
___
"FINISHER IS OUT OF ORDER. DETACH
FINISHER."
The number of sheets in the finisher (optional) exceeds the capacity. Remove
them.
___
"INSTALL FINISHER."
Paper is misfed inside of the finisher (optional). See the finisher's instruction
handbook to remove paper.
___
"CLOSE COVER OF FINISHER."
"CHECK PAPER IN FINISHER.
INCOMPLETE COPIES INSIDE."
There are no staples in the indicated location of the finisher (optional). See the
finisher's instruction handbook to load staples.
___
"STAPLER EMPTY. (FRONT)
ADD STAPLES."
"STAPLER EMPTY. (REAR)
ADD STAPLES."
Stapling and punching cannot be operated with small size paper like A5. See the
finisher's instruction handbook.
___
"CANNOT STAPLE THIS PAPER SIZE."
"CANNOT PUNCH THIS PAPER SIZE."
The punch waste tank of finisher (optional) is full of punch waste. See the
finisher's instruction handbook to remove the punch waste.
___
"PUNCH HOLE CONTAINER FULL."
"CANNOT STAPLE.
##:MAX. (STAPLE)"
Stapling cannot be operated since the number of copies in the staple sort mode
has exceeded its maximum capacity. Press the Start key and cancel the staple
sort mode to restart copying operation.
___
Summary of Contents for d-Copia 52
Page 1: ...42 52 COPIER OPERATION MANUAL Cod 506509D...
Page 11: ...7 NAMES OF PARTS...
Page 110: ......
