Olivetti d-Copia 3202MF Operation Manual Download Page 239

Page: 239 / 270

11-6

Troubleshooting > Error Code List

Error Code List

When a transmission error occurs, one of the following error codes is recorded in the TX/RX Result Report and Activity

Report.

NOTE

“U” or “E” will appear in the error code depending on the communication speed setting.

Error Code

Possible Cause/Action

Busy

Failed to establish connection with the recipient despite auto redialing the preset number of

times.

Send again.

CANCELED

Transmission was canceled due to an action to cancel transmission.

Reception was canceled due to an action to cancel reception.

E00300

U00300

Paper depletion occurred at the recipient machine. Check with the recipient.

E00430 - E00462

U00430 - U00462

Reception was canceled because of mismatching of communication features with the

sender machine although the line connection was established.

E00601 - E00690

U00601 - U00690

Communication was stopped due to the machine failure. Send or receive again.

E00700

U00700

Communication was stopped due to failure on the part of the sender or recipient machine.

E00800 - E00811

U00800 - U00811

Page(s) not sent correctly. Send again.

If you still have trouble, reduce TX Start Speed and send again.

NOTE

If the communication error occurs frequently, change the default setting of TX Start Speed in System

Menu.

E00900 - E00910

U00900 - U00910

Page(s) not received correctly. Ask the sender to resend.

NOTE

If the communication error occurs frequently, change the default setting of RX Start Speed in System

Menu.

E01000 - E01097

U01000 - U01097

Communication error occurred during transmission. Send again.

If you still have trouble, reduce TX Start Speed and send again.

NOTE

If the communication error occurs frequently, change the default setting of TX Start Speed in System

Menu.

E01100 - E01196

U01100 - U01196

Communication error occurred during reception. Ask the sender to resend.

NOTE

If the communication error occurs frequently, change the default setting of RX Start Speed in System

Menu.

U01400

Failed to establish communication with the sender or recipient machine because dialing

registered for a tone line system was used in a pulse line system.

E01500

Communication error occurred during high-speed transmission. Send again.

If you still have trouble, reduce TX Start Speed and send again.

NOTE

If the communication error occurs frequently, change the default setting of TX Start Speed in System

Menu.

Summary of Contents for d-Copia 3202MF















































































































































































































































































Search results

Summary of Contents for d-Copia 3202MF

Reviews:

Related manuals for d-Copia 3202MF

Brands by name

Popular brands

Olivetti d-Copia 3202MF, Operation Manual

Search results

Summary of Contents for d-Copia 3202MF

Reviews:

Related manuals for d-Copia 3202MF

Brands by name

Popular brands