Olivetti d-COLOR MF652, User Manual

Page: 76 / 95

Using Data Administrator (for the administrator) 6
6-14 d-Color MF752/652
6.5
Installing BioDriver (USB-Driver) (Windows XP)
To use Data Administrator , set up the operating environment after configuring authentication settings of this
machine.
For setup, install the BioDriver (USB-Driver) of the authentication unit, then install Data Administrator
PlugIn for Biometric Authentication Unit AU-102
.
0 Before setup, install Data Administrator V4.1.15000 or later in your computer. For details about instal-
lation, refer to the relevant
Data Administrator
manual.
0 To check the version of your Data Administrator , select the [Help] menu in Data Administrator , and
also select [Version Information] - [Plug-in version].
0 Administrator privileges are required to perform this task.
0 The latest
BioDriver (USB-Driver)
can be downloaded from our Web site.
1
Turn the
Main Power Switch
of this machine off, and disconnect the authentication unit from this ma-
chine.
2
Connect the authentication unit to the USB port of your computer.
The [Found New Hardware Wizard] dialog box appears.
% If the [Windows connect to Windows Update] screen appears, select ["No, not this time"], then click
[Next].
NOTICE
When connecting or disconnecting the USB cable, hold the plug. Otherwise, the machine may be dam-
aged or a failure may occur.
Do not connect another USB device to the same port as for the authentication unit. Doing so reduces
the USB power supply, resulting in an operation failure.
To use the USB hub, connect the self-power USB hub that supplies 500 mA or more.
3
Select [Install from a list or specific location (Advanced)], then click [Next].
4
Under [Search for the best driver in these locations.], select [Include this location in the search:], then
click [Browse].
5
Select the BioDriver (USB-Driver) file in the computer, then click [OK].
6
Click [Next], and perform the procedure by following the on-screen instructions.
7
When the installation completes, click [Finish].
Then, install Data Administrator PlugIn for Biometric Authentication Unit AU-102 . Refer to
page 6-15.