Olivetti d-COLOR MF652, User Manual

Page: 16 / 95

Checking the list of optional components 2
2-4 d-Color MF752/652
2.1
4 Working Table WT-509 This is used to move the Control Panel . This is also
used when the Authentication Unit is installed.
5
Working Table WT-506
Provides an area to temporarily place an original or
other materials. This is also used when the
Authenti-
cation Unit
is installed.
6
Output Tray OT-503
Collects printed pages.
7 Keyboard Holder KH-102 Install this holder to use a external keyboard.
For details on external keyboards, contact your service
representative.
8
Mount Kit MK-715
Used to print data on banner paper.
9 Large Capacity Unit LU-301 Allows you to load up to 3000 sheets of 8-1/2 e 11 (A4)
size.
This unit is referred to as a
Large Capacity Unit
in the
manual.
10 Large Capacity Unit LU-204 Allows you to load up to 2500 sheets of SRA3 or 11 e
17 (A3) size.
To change the paper size, contact your service repre-
sentative.
This unit is referred to as a
Large Capacity Unit
in the
manual.
11 Image Controller IC-414 ver1.0 Built-in Image Controller .
Installing this unit will provide higher quality printing re-
sult.
Video Interface Kit VI-506
is required to install
Image
Controller IC-414 ver1.0
.
12 Finisher FS-534 Sorts, groups and staples printed paper before output-
ting it.
13 Saddle Stitcher SD-511 Install this unit onto Finisher FS-534 . This unit sup-
ports the fold/bind function.
It is referred to as
Saddle Stitcher in the manual.
14 Punch Kit PK-520 Install this unit onto Finisher FS-534 .
This unit supports the punching function.
15
Saddle Stitcher SD-512
Install this unit onto
Finisher FS-535
. This unit sup-
ports the fold/bind function.
It is referred to as
Saddle Stitcher
in the manual.
16 Finisher FS-535 Sorts, groups and staples printed paper before output-
ting it.
17 Punch Kit PK-521 Install this unit onto Finisher FS-535 .
This unit supports the punching function.
18
Post Inserter PI-505
Install this unit onto the
Finisher FS-535
to enable in-
sertion of a cover sheet into copied or printed sheets.
This unit also allows you to manually operate the fin-
isher (only the lower tray is available).
19
Job Separator JS-602
Install this unit onto
Finisher FS-535
.
Collects printed pages.
This unit is referred to as
Job Separator in the manual.
20
Z Folding Unit ZU-606
Install this unit onto the
Finisher FS-535
to enable Z
folding or punching holes.
This unit is referred to as a
Z Folding Unit
in the man-
ual.
The following options are not shown in the figure.
21 Fax Kit FK-511 Used to operate this machine as a fax machine. Alter-
natively, this kit allows more telephone lines to be con-
nected.
22
Stamp Unit SP-501
Stamps a scanned original when sending a fax. This
unit allows you to check that the original has been
scanned.
23
Spare TX Marker Stamp 2
A replacement stamp for the
Stamp Unit SP-501
.
No. Name Description