Olivetti d-color MF551, Network Administrator'S Manual

Page: 180 / 325

Using IEEE802.1X authentication
2
2-162 d-Color MF651/551
2.49
EAP-Type Select an EAP authentication method.
If you select "Depend on Server", the EAP-Type provided
by the authentication server will be used for authentica-
tion. Configure the supplicant settings as required for this
machine according to the EAP-Type provided by the au-
thentication server.
Do not set this item to "OFF". EAP authentication
method
EAP-TTLS Configure settings for EAP-TTLS.
anonymous Enter an anonymous name to be used for EAP-TTLS au-
thentication (up to 128 characters).
This item is available if EAP-Type is set to "EAP-TTLS" or
"Depend on Server".
Inner Authentica-
tion Protocol Select an EAP-TTLS inner authentication protocol.
This item is available if EAP-Type is set to "EAP-TTLS" or
"Depend on Server".
Server ID Enter a server ID (up to 64 characters).
This setting is required if you very the CN of the server cer-
tificate. Do you verify CN of
the server certifi-
cate?
Client Certificates Select whether to encrypt authentication information us-
ing client certificates of this machine. You can configure
this setting when client certificates are registered in this
machine.
If EAP-Type is "EAP-TLS", the client certificates are al-
ways required.
This setting can be configured even if EAP-Type is set to
"EAP-TTLS" or "PEAP".
Encryption
Strength Select an encryption strength level for encrypted commu-
nication with TLS.
•
Low: Keys of any length are used for communication.
• Mid: Keys that are more than 56 bits in length are used
for communication.
• High: Keys that are more than 128 bits in length are
used for communication.
This item is available if EAP-Type is set to anything other
than "OFF" or "EAP-MD5".
Network Stop Time If an authentication process does not succeed within the
specified time, all network communication will stop. To
specify the delay between the start of an authentication
process and the stop of network communication, select
this box.
Stop Time Specify the delay (sec.) between the start of an authenti-
cation process and the stop of network communication.
To restart the authentication process after network com-
munication has stopped, turn the main power of this ma-
chine off and on again.
Item Description Prior check