Oliver LEGACY ELITE II 2023, Owner'S Manual

Page: 68 / 106

68
USING THE REGULATOR
To supply gas to the components that use propane, you will need to open the valves on
the propane tanks. The regulator controls the flow of propane throughout the LP lines.
The two-stage automatic changeover regulator controls the flow of propane throughout
the LP lines.
1. Point the changeover lever to the left or right to indicate your primary propane tank.
When gas is present in your primary tank, the indicator on the front of the regulator
will be green.
2. Once your primary tank is depleted, the automatic changeover function of the
regulator will automatically switch to the reserve tank and the indicator will be red,
letting you know the primary tank is depleted and the reserve tank is now being used.
3. If needed, you can point the changeover lever toward your reserve tank and view the
indicator to let you know how much gas remains in the reserve tank.
USING THE QUICK CONNECTS OPTION
Most propane grills or campfires come with a hose that connects directly to a propane
bottle. In order to use the propane quick connects on your trailer, you will need a hose
that uses a 1/4 inch male NPT quick connect fitting. A propane hose is not supplied with
your travel trailer.
1. Turn the lever on the quick connect to the OFF position.
2. Next, pull the dust cap off the quick connect, push the sleeve back on the connection
and insert the male fitting into the female quick connect socket.
3. Push the fitting in until you feel it lock.
4. Turn the lever on the quick connection back to the on position to open the flow of
propane to your grill, campfire, or other propane components.
REPLACING OR REMOVING THE TANKS
1. To remove your propane tanks for refilling, first, ensure the tank is turned off and
unscrew the hose connection by turning the connector counter-clockwise.
2. Between the tanks, remove the large wing-nut by turning it counter-clockwise until it
comes off the threaded rod and then lift the regulator up and set it to the side.
3. Now, lift the bar that secures the two tanks and remove or allow it to drop between
the tanks.
4. Carefully lift the tank from the propane housing.
5. Once the propane tank is refilled, reverse the steps to secure the tanks inside the
propane housing.
PROPANE