Oliver LEGACY ELITE II 2023, Owner'S Manual

Page: 48 / 106

48
PLUMBING
OVERVIEW
Oliver’s plumbing can be divided into two separate systems. The freshwater system
consists of those items which are used to deliver water for your use. The wastewater
system includes the drains and tanks that store and remove water that has been used.
The plumbing system has the dual ability to be self-contained with onboard storage,
complemented by a digital holding tank monitoring system, or to use facilities provided
by an external pressurized source. In either case, the components of the system operate
like those in your home. Components of the plumbing system consist of strong,
lightweight, corrosion-resistant materials. By following the instructions outlined here, you
can expect efficient operation with minimum maintenance. Freshwater is provided from
an external pressurized source or from the freshwater storage tank. These connections on
the Oliver are located at the rear, bottom driver side corner of the trailer.
PLUMBING SYSTEM - CURBSIDE ACCESS PANELS
Most of the important plumbing components and valves are found under the curbside
seating access panels. These components are referenced throughout the Plumbing
section of this manual.
Below are diagrams of the Normal and Boondocking valve configurations.
ELITE II VALVE CONFIGURATION
Water Pump
Accumulator
Filter
Normal Valve Configuration
Water Pump
Filter
Boondocking Valve Configuration
Drawing water from rear inlet to fill fresh tank.
Accumulator
1
2
3
4
1
2
3
4