Settings:
Elevator:
+/- 9mm (if you like with expo)
Rudder:
+/- 50mm (if you like with expo)
High start hook position 6th hole counted from rear side of the hook board.
Before drilling the hook into the hook board use a needle to make a marking from inside to
outside and than drill with 1,5mm before screwing the hook into the hook board.
Picture shows prototype of Fresh
I wish you many good thermal flights
Oliver
If there are any questions please ask and write to:
Web: www.oliver-flugmodellbau.de Email: [email protected]
25
