Construction of inner sektion and outer sektion of the outer wing
The inner sektion of the outer wing has to be build in normal position.
The outer sektion of the outer wing has to be build upside down !
Stick the hybrid ribs with
plywood and balsa wood with
superglue together.
Sand slightly and clean the tube
spar the entire length with 400
grit sandpaper.
Slide spacers to the 8mm tube
spar and glue with superglue.
The distance of the rings
according to the distance of the
full ribs.
Possibly adjust the diameter of
the rings.
Insert 5 minute epoxy in the
12mm tube and insert the 8mm
tube spar into the 12mm tube
spar and glue. Use also glue
between the rings.
Ribs on the spar pushing and
adjust to the tail strip and the
rib jig for the inner sektion and
glue with superglue.
Do not push the end ribs on the
spar.
18
