When dried turn the outer wing
around in normal position and use
the dihadral jig to glue the end
ribs.
The wingtip is made of three formed
balsa pieces. Grind the tip with
sandpaper.
The dihadral giving FRP piece in the
outer wing is glued with enough 5
minute epoxy into the tube spars.
The end ribs glued together with
wood glue.
Construction of wing conector
The fixture is made of rings and
spacers.
The small holes in the spacers showing
the side with the dihadral shape.
On the dihadral side is the 6mm bore
above of the ring. In the other ring is
the 6mm bore down.
20
