The spacers with "excess length"
are installed in the wing center
section and aligned with the
template Z7. The supernatant is
grind away after drying with the
rib.
Then the framework is installed
without the "excess length" in the
outer wing and aligned using the
5mm Carbon rod.
The aluminium tube is at
the end ribs always at the
top of the timber ring.
The 10mm magnet can
inserted as option. If
inserted use superglue.
The needed torsion bars are
glued with superglue.
During flight the outer
wing is always secure
with tape to the center
wing!
22
