Detail photo of the transitition
of the 8mm spar into the
12mm tube spar.
After all ribs are aligned neatly, the wings with some weight rests on the building
board, glued with superglue spar and leading edge with the ribs.
Glue the end ribs
according to the dihadral
jigs.
Glue the spar carefully
with the ribs.
Saw off over standing
tubes and grind the
surface carefully.
The outer sektion of the outer wing has to be build upside down ! Make
sure that is made a left and a right outer wing sektion.
Align ribs with the jig and the
trailing edge.
Push nose tube into the ribs
noses. Align carefully and glue
with superglue.
19
