36 / 47
Date
30/9/2016
File
Document code
921163800_09_007
Page
36 from 47
Figure 5-3 shows the tree detail of this menu.
TECHNICIAN
TEST
CONFIGURATION
NETWORK
SETTINGS
NUMBER OF ZONES
SIRENS
AUXILIARY RELAYS
ETHERNET CARD
IP ADDRESS
RESET ETHERNET
SELECT LANGUAGE
ANNUAL TEST
FACTORY DEFAULTS
SET ZONES IN TEST
RESET ZONES IN TEST
ANNUAL TEST OK
ZONES IN TEST
CLEAR EVENTS
NO
YES
RESET COUNTER
NO
YES
MANUFACTURER MENU
CHANGE TECH CODE
Figure 5-32. Technician menu
Next there will be a detailed description of each option.
5.1
Test menu
In this option we can adjust the state of each zone during the test. The setting is done using the option
«ZONES IN TEST» where we can select which zone will be on test.
After adjusting this we can test the zones without affecting the outputs of the panel. The state of the
zones in test can be found in the option INFORMATION
ZONES
ZONES IN TEST, ALARMS IN
TEST ZONES and FAULTS IN TEST ZONES.
To reset the zones to normal operation use the option «UNSET ZONE IN TEST».
