11 / 47
Date
30/9/2016
File
Document code
921163800_09_007
Page
11 from 47
2.5
Access Level 1 functions
This access level contains the functions that can be set by a normal user
ΣΣΣμΣ
2-8
. Σ ΣΣΣΣΣΣΣΣΣΣ ΣπΣπΣΣΣΣ πΣΣΣΣΣΣΣΣ 1
-
“Buzzer Silence”
: In case of an
alarm or fault, if this key is pressed then
the internal buzzer stops. As long as the
event exists the buzzer will sound once
every 30 seconds. If during this state a
new event happens then the buzzer will
start to sound again.
-
“LAMP TEST”
: When the panel is in
the normal-quiescent state then if we
press this button the panel will light all the
leds and the screen so we can verify the
good operation.
-
“OVERDRIVE DELAYS”
: If an alarm
event occurs and there are active delays,
the user can override these delays by
pressing this button. The output will be
activated immediately.
-
-
“VIEW ALARMS”
: In case of an
alarm event, if this key is pressed then we
are presented with a menu from which we
can see all the current alarms. We will
refer to this in detail in the next
paragraph.
-
“VIEW FAULTS”
: In case of a fault
event, if this key is pressed then we are
presented with a menu from which we
can see all the current faults. We will refer
to this in detail in the next paragraph.
2.6
Basic menu for Access Level 1
When the main screen is shown and we press the “ENTER” key then we are presented with the main
selection menu. The screen shows the following.
