Olimpia splendid DOLCECLIMA AIR PRO, Instructions For Use And Maintenance Manual, Page: 59 / 424

DOLCECLIMA AIR PRO
EN - 21
ENGLISH
For the connection to the Wi-Fi network and the use of the App, please refer to the attached
Wi-Fi manual.
4 - MAINTENANCE AND CLEANING
Before proceeding with any maintenance and cleaning inter-
vention, always make sure you disconnected the power plug
from the power socket.
Do not touch the metal parts of the appliance when you remove
the filter.
There is a risk of injury due to the sharp metal edges.
Do not use water to clean the internal parts of the air conditioner.
Exposure to water can ruin the isolation, with the risk of electric shocks.
4.1 - CLEANING
4.1.a - Cleaning the appliance and the remote control
a . Use a dry cloth to clean the appliance and the remote control.
b . It is possible to use a cloth moistened with cold water to clean the appliance in case it’s very dirty.
Do not use a chemically treated or antistatic cloth to clean the appliance.
Do not use gasoline, solvent, polish or similar solvents.
These products could cause the breakage or deformation of the plastic surface.
4.1.b - Air filters maintenance
The filter system consists of a mesh filter (fig. 34 ref. 27a) and a series of additional filters that the user can
choose from (fig. 34 ref. 15).
To ensure the indoor air is filtered correctly and to guarantee that your air conditioner runs efficiently, it is
vital to clean the air filters regularly.
The additional filters must be changed after around 500 working hours.
In order for the filter system to work correctly only original spare parts should be used.
4.1.c - Cleaning the air filter
A dirty air filter reduces the cooling capacity of the appliance.
Please clean the filter once every 2 weeks.
a . Release the grille (27) together with the filter (27a) and raise it to remove it from the appliance (Fig.19).
b. Remove the filter (27a) from the grille (27) (Fig.20).
c. Clean the filter (27a) using a vacuum cleaner or wash it with water, then let it dry in a fresh environment.
Provide for the filter (27a) replacement if it is damaged.
d. Make sure the filter (27a) has dried completely.
e. Reposition the filter (27a) in the grille (27) paying attention to its correct positioning (Fig. 22).
f. Suck possible fluff from the plates (Fig. 21).
g. Position the grille (27) together with the filter (27a) on the appliance body making sure it is correctly hooked.
Do not use the appliance without the filter (27a).