Olimpia splendid DOLCECLIMA AIR PRO, Instructions For Use And Maintenance Manual, Page: 57 / 424

DOLCECLIMA AIR PRO
EN - 19
ENGLISH
3.11.a Programmed switching on
a
. When the appliance is in standby mode, select the operation mode, the desired temperature and ventilation
speed.
- On the control panel: - press and set the switching on delay time with the keys +/-
.
- To activate the function, press or wait approximately 5 seconds so that
the set time on the display stops flashing (the display returns to showing
the environment temperature).
The icon lights up.
- On the remote control: - press the key “ TIMER ON ” to access the function and then press the key
“ TIMER ON ” once or more until the switching on delay time is set.
- Direct the remote control towards the appliance; a beep confirms the acti -
vation of the function.
- The icon on the control panel and the indicator “
Timer On
” on the remote
control display light up.
b
. Once the set time has passed, the appliance starts with the same settings (mode, temperature and ven-
tilation speed) as those before switching off.
c
. Time can be set with 30 minutes steps up to 10 hours and with 60 minutes steps from 10 to 24 hours.
d
. Starting the appliance or adjusting the timer setting to “
0.0h
” will cancel the programmed switching on
function.
3.11.b - Programmed switching off
a
. When the appliance is running, set the delayed switching off time.
- On the control panel: - press and set the switching off delay time with the keys +/-.
- To activate the function, press or wait approximately 5 seconds so that
the set time on the display stops flashing (the display returns to showing
the environment temperature).
The icon lights up.
- On the remote control: - press the key “
TIMER Off
” to access the function and then press the key
“
TIMER Off
” once or more until the switching off delay time is set.
- Direct the remote control towards the appliance; a beep confirms the acti -
vation of the function.
- The icon on the control panel and the indicator “ Timer Off ” on the remote
control display light up.
b . Once the set time has passed, the appliance switches off.
c . Time can be set with 30 minutes steps up to 10 hours and with 60 minutes steps from 10 to 24 hours.
d . Switching off the appliance or adjusting the timer setting to “ 0.0h ” will cancel the programmed switching
off function.
3.12 - OTHER FUNCTIONS
3.12.a - SILENT function
• This function can only be activated from the control panel of the appliance.
a . When the appliance is working, press key SW8 (speaker); The speaker symbol appears.
Ventilation speed automatically sets itself to minimum.
b.
Press the key again to deactivate the function.
3.12.b - SLEEP function
• This function can be activated only from the remote control.
• This function is not available while the Dehumidification (DRY) and Fan Only (FAN) modes are
active.
a
. When the appliance is running, press the key “
SLEEP
” on the remote control.
The icon appears on the control panel and on the remote control display..
The appliance will decrease (when cooling) or increase (when heating) the set temperature by 1°C (1 or
2 F) for 30 minutes.