OKOndt GROUP Eddycon C, Operating Manual, Page: 48 / 62

48
In the window that appears, choose the path to removable media – the
flaw detector memory or the path where previously there was stored data on
PC, move the cursor to the necessary file with the testing results and click
"
Open ".
After opening the file in the time diagrams window and in the active area
of the program there is displayed the stored defectogram and there is the
possibility to view the testing results, measurements of the signal parameters,
as well as to make the report protocol followed by its printing out.
Note - Viewing a list of data on the testing results from the flaw
detector memory does not store this data automatically in PC memory.
3.14.3.4 Printing out results of testing
To print out the testing results it is required:
-
Select " Report " item in the main menu.
-
Fill in the report form (Figure 36).
-
In the preview window of testing results click " Print " .
3.14.3.5 Disconnecting the flaw detector with PC
-
Turn off the flaw detector by pressing the on/off button .
-
Disconnect the USB cable.