3
INTRODUCTION
User manual of «Eddycon C» portable eddy current flaw detector
(hereinafter referred to as
"
Flaw detector
"
), is intended for the study of
operation principles of the flaw detector and its operating instructions, and
includes the information on application, specifications, operating principle
and structure, operating instruction, and also other information allowing a
full-scale implementation of flaw detector technical capabilities.
The following graphic symbols and designations of controls, plug-type
connections and indicators are used in the flaw detector.
Front panel of the «Eddycon C»:
Figure 1
–
«Eddycon C» eddy current flaw detector. Front panel
Automatic flaw alarm by the first and second frequencies,
respectively, and by the mix of the 1
st
and 2
nd
frequencies, as well as
overloading alarm square. If ALARM triggers during testing, the signal
amplitude and phase are automatically measured and the signal is evaluated
by the calibration curve.