30
To connect the flaw detector with Cable and the eddy current probe CP-
13 for measuring the electrical conductivity.
To press the
button for entering the instrument menu «SETTINGS»
and to choose «Test mode» - «CONDUCTIVITY».
Figure 18 –
«CONDUCTIVITY» Test Mode
To press
to enter the «TEST» menu.
In the menu «TEST» under the position «Current set», to choose by
,
buttons the appropriate setting for the measurement at a specified
frequency and to press the
button to activate the settings.
«CP13 – 60 kHz»;
«CP13 – 480 kHz».
Figure 19 –
Choosing and activating settings «CP13 – 60 KHZ»
After settings activation make calibration at standard samples.