Okolab LEO, Manual

Page: 21 / 101

17
9 Navigation menu
9.1 Homepage
Figure 19 shows the Homepage of LEO:
10
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v v v v
9
8
7
1
2
3
4
5
6
11
12
13
15
16
17
18
20
21 22
23 24
25
26
27
28
29
v
14
v
19
Figure 19. LEO Homepage
1. Wet/Dry button : to set the Dry or Wet Mode. See paragraph 10.1.5.
2. Pump/Diffusion button . Press Pump button to run the pump and draw the gas sampling into LEO
3. CO2-O2 Single Point Measurement : to start a Single Point measurement of CO2 -O2 gas
concentration. See paragraph 10.1.3.
4. CO2.O2 Logging : to start a Logging of CO2 -O2 gas concentration. See paragraph 10.1.4.
5. Temperature Single Point Measurement : to start a Single Point temperature measurement. See
paragraph 11.2. If no Temperature sensor is connected to LEO, this function does not work.
6. Temperature Logging : to start a temperature logging. See paragraph 11.3. If no Temperature sensor
is connected to LEO, this function does not work.
7. Device : to select (or add) a device. See paragraph 9.3.1.
8. View : to access to the stored data. See paragraph 12.1.