Page: 64
Service Guide for PM4410
Chapter 4 Adjustments
Adjustments
(1) Be sure to carry out this adjustment with the printer mechanism mounted on the lower cover.
(2) Be sure to carry out this adjustment operation on a level and highly rigid work table (flatness: less than 0.039 inch or
1 mm) so as to minimize adjustment error.
[Service Tool]
No. 2-200 Philips screwdriver
l
No. 2-200 screwdriver
l
Feeler gauge
l
500 g rod tension gauge
l
Calipers
l
Adjustment should be conducted after removing the Rear Cover (B) and setting the Dip Switch 1 on the board to "ON"
(maintenance mode). (See Note 1 and 2)
Note 1:
After the adjustment and lubrication have completed, set the all the dip switches to "OFF" (normal operation
mode), and fix the Rear Cover (B) with the mounting screws.
Note 2:
The local test printing except for the menu printing should be implemented with all the dip switches set to "OFF"
(normal operation mode).
Item
No.
Items
Standard Value
Illustration
Adjustment Method
1
Protector Gap Adjustment
(1) Range Adjustment
(1) Remove the Rear Cover (B), and set Dip Switch 1 on
the board to "ON" (maintenance mode).
(2) Close the access cover, and turn on the printer while
pressing Switches 7 and 10 on the operation panel. (This
starts the auto gap adjusting mode). The platen moves
forward/backward up to the adjusted position.
(3) When the platen stops, turn off the printer.
Summary of Contents for Pacemark 4410
