Page: 13
Service Guide for PM4410
Chapter 2 Operation
2.1.7 Printing Operation
The time chart for the spacing and printing, line feed operations are as shown below.
The spacing, printing and line feed operations are controlled by the MPU. The MPU also controls the entire timing of
these operations.
When starting the printing operation, the MPU specifies the distance moved, print start position, printing speed, etc. to
the LSI, and activates the spacing motor. The MPU, when the carriage arrives at the print position specified, activates the
printer to start printing, and when printing terminates, the MPU activates the line feed motor for line feed operation.
During the line feed operation, the MPU causes the carriage to decelerate. Upon termination of line feed operation, the
spacing operation is performed.
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Summary of Contents for Pacemark 4410
