background image

- 25 -

Parts Nomenclature and Functions

 

„

Standby Screen

The standby screen shows either of two displays: 

“Supplies Life display” or “Unwinder Config 

display”.
Use the procedure below to switch between the 

two standby screen displays.

Press either the scroll button 

 or 

 

on the control panel to display the 

“Functions” screen.

Press the scroll button 

 several times 

to select [Admin Setup], and then press 

the <OK> button.

Use the numeric keypad to input the 

administrator password.  

The factory default password is 999999. 

Press the <OK> button after inputting 

each character.

Press the <OK> button.

Press the scroll button 

 several times 

to select [Panel Setup], and then press 

the <OK> button.

Press the scroll button 

 several times 

to select [Idle Display], and then press 

the <OK> button.

To show the “Supplies Life display”, 

select the [Supplies Life], and then 

press the <OK> button. 

If you want to display the “Unwinder 

Config display”, select the [Unwinder 

Config], and then press the <OK> 

button.

Press the <ON LINE> button to return 

to the standby screen.

Summary of Contents for Pro1040















































Reviews: