background image

- 35 -

Connecting to a PC

USB Cable Connection

Use this connector when connecting the printer 

to a computer with a USB cable.

USB cable

 

„

Things to Prepare

USB cable

Note

 

z

The printer does not come with a USB cable. You need 

to prepare a USB 2.0 cable that is no longer than two 

meters.

 

z

If you are planning to connect using the USB 2.0 Hi-Speed 

mode, you need to prepare a Hi-Speed USB 2.0 cable.

 

z

USB 3.0 is not supported.

 

„

To Connect a USB Cable

Taking care to orient the connector 

correctly, connect the square end of the 

USB cable to the printer (

).

USB 

interface 

connector

USB cable

Connect the other (flat) end of the USB 

cable to the computer (

).

USB port

USB cable

Note

 

z

Do not plug the USB cable into the printer's LAN (network) 

interface connector. Doing so can cause malfunction of the 

printer.

 

z

Do not plug or unplug the USB cable while the computer 

or printer is turned on. Doing so can cause malfunction of 

the printer.

Memo

 

z

Use the operation panel to configure the printer's USB 

transfer rate setting in accordance with the transfer rate 

(speed) of the USB port of the computer.

Summary of Contents for Pro1040















































Reviews: