Oki Pro1040, Setup Manual

Page: 23 / 46

- 23 -
Parts Nomenclature and Functions
Control Panel
The control panel can be used to check the current status of the printer and to access various functions
available with the printer.
With this printer, print cartridges etc. can be replaced while monitoring the LCD on the control panel.
If a paper jam or some other problem occurs on the printer, corrective action can be taken while
monitoring messages that appear on the LCD.
④
②
①
③
⑨
⑩
⑪
⑤
⑥
⑦ ⑧
⑫
⑬
①
Display screen
z
Shows the printer's status and menus.
z
The standby screen shows either of two displays:
“Supplies Life display” or “Unwinder Config
display”.
*1
②
<POWER> button
z
Turns the main power supply of the printer on or
off.
z
Pressing this button while in the off mode turns on
the main power supply.
③ <POWER SAVE> button
z
Enters or exits the Power Save Mode.
z
This button is lit green in the Power Save Mode.
④
<OK> button (menu button)
z
Executes the currently selected menu item or
applies the setting being configured.
⑤
<HELP> button
z
Displays the Help Screen.
z
This button lights orange when you can refer
to help messages describing the error that has
occurred and providing information about how to
clear the error.
⑥
<BACK> button
z
Goes back to the previous screen.
⑦ ATTENTION lamp
z
Indicates the printer's status.
z
This lamp is unlit when the status is normal.
z
An error causes this lamp to light or flash orange.
⑧
Scroll buttons
▲
and
▼
(menu buttons)
z
Use these buttons to select menu screen items,
and to scroll menu pages forward or back.
z
On a value input screen, these buttons are used
when inputting values.
⑨
<ON LINE> button
z
Switches between online and offline.
z
This button is lit green while the printer is online
and unlit when offline.
⑩
Numeric keypad (1 to 0, *, C)
z
The numeric keypad is used when inputting
numeric values or passwords.
z
Pressing the <*> (<Fn>) key while the standby
screen is displayed displays the "Function Number
Input" screen for inputting a number that directly
accesses menu items.
⑪
<CANCEL> button
z
Cancels an ongoing print job or setting operation.
⑫
<FEED> button
*2
z
Feeds paper.
⑬
<UNLOAD> button *2
z
Unloads paper.
*1: Refer to "Standby Screen" (P.25) regarding
how to switch the standby screen of the control
panel.
*2: Covered in the factory default configuration.