5. INSTALLING UTILITY
80
name specified”.
2
Insert the printer driver disk in the floppy drive and enter
“A:¥MLLPR¥Setup.exe” for “Name”
3
Click “OK” button and start the Setup program.
4
Click “Next” button in the “SETUP” dialog.
5
Select “UTILITY Deletion” and click “Next” button to execute
UNINSTALL.
Caution: Immediately after the Utility is deleted, the folder where LPR
Utility is installed and the spool folder remain visible on the
Explore, but they will disappear when you execute “Refresh” in
“View” menu of the Explore.
5.3.6 Registering the printer to LPR Utility or deleting the printer
from there
5.3.6.1 Registering LPR printer
You will register the printer to be used in LPR UTILITY. If you register the
printer to LPR Utility, the output destination of the printer driver that has
been registered will be set in the spool directory created at the time of
LPR Utility Installation.
1
Double-click “Oki LPR UTILITY” icon on the “Oki LPR UTILITY”
window.
2
Select “ADD PRINTER...” in the “REMOTE PRINT” menu on the
“Oki LPR UTILITY” window.
3
Select the printer driver “OKIPAGE 12i” from “PRINTER:”, and
enter the IP address of the printer in “IP ADDR:”.
4
Click “OK” button, and “OKIPAGE 12i” will be added to “Oki LPR
UTILITY” main window. You can add other printer drivers using
the steps from 1 through 4.
5
Open the Printer folder in the Control Panel of Windows 95/98,
and open the Properties of the printer driver you registered in
“ADD PRINTER...”. If “C:¥MLSPOOL¥MLLPR00 (unknown local
port)” is displayed for “Print to the following port:” of the “Details”
window, the printer registration was performed correctly.
(Directory of the port to print to varies with the directory specified
at Install.)
