manualshive.com logo in svg

Oki PAGE 12i, User Manual, Page: 2 / 105

Share
Download
Oki PAGE 12i User Manual Download Page 2

Every effort has been made to ensure that the information in this document
is complete, accurate, and up-to-date.
OKIDATA assumes no responsibility for the results of errors beyond its
control. OKIDATA also cannot guarantee that changes in software and
equipment made by other manufacturers and referred to in this guide will
not affect the applicability of hte information in it.  Mention of software
products manufactured by other companies does not necessarity constitute
endorsement by OKIDATA.

Copyright 1999 by OKIDATA. All rights reserved.

Second Edition June, 1999

OKIDATA ,OKILAN and OkiView are registered trademarks of Oki Erectric
Industry Company, Ltd.

OKIDATA: Marque déposée de Oki Elecric Industry
Company, Ltd.; Marca Registrada, Oki Electric Industry Company, Ltd.

OKIPAGE is a trademark of OKI America, Inc.

Apple, AppleShare, AppleTalk, EtherTalk, LocalTalk, and Macintosh, are
registered trademarks of Apple Computer, Inc.

Microsoft, Windows, and Windows NT are registered
trademarks and Windows 95/98 is a trademark of Microsoft Corporation in
the U.S and other countries.

Novell and NetWare are registered trademarks of Novell, Inc. in the United
States and/or other countries.

UNIX is a registered trademark of The Open Group.

Summary of Contents for PAGE 12i










































































































Reviews:

No comments