4. ADMINISTRATING PRINTERS IN NETWORK
46
Set
command to use:
set protocol or sepro
Target account:
Administrator user
Here, how to change the IP address from 192.36.253.96 to 192.36.253.100
is shown, as an example.
Procedure
1
Confirm the current setting.
OkiPage>show address [RET]
2
Change the setting.
OkiPage>set protocol [RET]
<<Protocol setting>>
<Select Protocol>
TCP/IP=1 NetWare=2 EtherTalk=3 EXIT=0 : 1 [RET]
Will you use TCP/IP? (y/n): y [RET]
→
Type “n” to DISABLE TCP/IP.
Will you use DHCP? (y/n): n [RET]
→
Type “y” to ENABLE DHCP.
Will you use RARP? (y/n): n [RET]
→
Type “y” to ENABLE RARP.
IP Addr
(OLD) 192.36.253.96
(NEW) 192.36.253.100 [RET]
SUBNET MASK
(OLD) 255.255.255.0
(NEW) [RET]
DEFAULT GATEWAY
(OLD) 192.36.253.254 (NEW) [RET]
Are you re-setting (y/n): n [RET]
→
Type “y” to reset.
OkiPage>logout (or exit or quit) [RET]
→
If you wish to set other protocols now, enter an appropriate
command, without logging out.
You can change TCP/IP address with the set address command,
too, in addition to the set protocol command.
OkiPage>set address[RET]
