4. ADMINISTRATING PRINTERS IN NETWORK
68
4.2.4
Setting EtherTalk
4.2.4.1 EtherTalk Enable/Disable
To use this network card in the EtherTalk environment, EtherTalk must be
set to ENABLE on the printer’s operator panel.
1
Confirm that the printer is in the idle state from the LCD panel and
the lamp.
2
Press “ON-LINE” button to set the printer to OFF-LINE, and hold
“MENU1” button for 2 seconds or longer to display “PRINT MODE”.
3
Press “MENU1” button repeatedly to display “NETWORK”. After
“NETWORK” is displayed, press “ENTER” button.
4
“TCP/IP” is displayed. Press “MENU1” button repeatedly to move
to “ETHERTALK” Item.
5
When you see that the bottom column of the LCD of the
“ETHERTALK ” is “ENABLE*” (* indicates that that value is set),
press “ON-LINE” button without doing anything and exit the menu.
If the bottom column of the LCD is “DISABLE*”, press “
t
” button or “
s
”
button, to have “ENABLE” displayed in the LCD bottom column. Then
press the “ENTER” button to have “ENABLE*” displayed. Then, press
“ON-LINE” button to exit the menu. Now the EtherTalk is enabled.
