Oki OKIOFFICE84, Maintenance Manual

Page: 18 / 519

1 - 11 40672201TH Rev. 4
5 Automatic document feeder (ADF)
6 Document skew
7 Document jam detection
8 Document jam removal
Table 1.5.1 (2/10) Basic Performance Specifications
No. Item Specifications
Document width
Communication
Mode/Paper width
Effective reading
width
Copy size
ISO A4 (210 mm)
[INT'L/FTZ]
G3/A4
A4
208 mm for TX
203.2 mm for local copy
(208 mm for local copy with
Horizontal Reduction = ON)
NA letter (216 mm)
[US/CANADA]
G3/A4
Letter
NA legal (216 mm)
[US/CANADA]
G3/A4
Legal
215 mm for TX
203.2 mm for local copy
(214 mm for local copy with
Horizontal Reduction = ON)
215 mm for TX
203.2 mm for local copy
(214 mm for local copy with
Horizontal Reduction = ON)
Note Local copy: Printable reading width in local copy mode
4 Effective reading width
Max. 20 documents for OKIOFFICE84/OKIFAX 4500: NA
Letter or A4 (20-1b/75 gm)
Max. 15 documents: NA Letter or A4 (16-28 lb/60-105 gm
bond paper)
Documents shall be placed facedown on ADF stacker.
The first sheet will be fed first in the feeder and will exit
facedown in the document stacker.
Max. 2.6 mm skew over a document of A4 length.
For a document longer than A4 length, occurrence of skew
exceeding 2.6 mm over any A4 length is 0.5% or less.
(Except 13 lb)
1) Transmission will stop and line disconnection will occur
when the end of a document is not detected within 356
mm after scanning begins (except for the long document
scanning. TF + 10)
2) A jam will also be declared if the document does not
reach the scanning position within 10 seconds after the
start of a document feed.
Note: When a jam is detected during message transmis-
sion from the feeder, the machine will stop scanning
and disconnect the line, but its receiving capability
will remain valid.
Manual release