Oki OKIOFFICE84, Maintenance Manual, Page: 95 / 519

2 - 51 40672201TH Rev. 4
P.F.
Item Specifications Default
No.
Table 2.9.4 (2/4) User's Initial Settings (Function Program)
The fax compares lower four digits of TSI/CSI
received from remote station with fax numbers
registered locally for one-touch dial and two-digits
autodial.
If unmatched, the communication will be auto-
matically disconnected.
OFF/RX only/TX and RX selectable.
* Prevention of direct mail or wrong number calls.
(Reference)
TSI:
Transmitting subscriber identification
CSI: Called subscriber identification
Selects automatically the mode set up when a
document is loaded on the feeder.
The following combinations are selectable.
STD/NORMAL
→
STD/DARK
→
STD/LIGHT
→
FINE/NORMAL
→
FINE/DARK
→
FINE/LIGHT
→
EX.FINE/NORMAL
→
EX.FINE/DARK
→
EX.FINE/LIGHT
→
PHOTO/NORMAL
→
PHOTO/DARK
→
PHOTO/LIGHT
→
STD/NORMAL
→
• • •
Specifies the time for which the fax alerts an
operator on reception of a call in the telephone/fax
automatic swichover mode.
20 sec./35 sec. selectable
Refer to page 2-36
User can register ring response time if National
code is:
INT’L, GBR, NOR, SWE, USA, HOL, ESP.
ITA, GRE or GER
Selects the ring response time.
1 ring/5/10/15/20 sec. selectable.
Specifies the detected distinct ring. (not available
in all countries)
OFF/ON/SET selectable.
Selects A4, LETTER or LEGAL 13˜, LEGAL 14˜
OTHER by this function.
The operator must select the preferable paper
size as the machine cannot detect the paper size
automatically.
Note: OTHER message appears when operating
with MFP terminal.
08 Closed network
09 TX mode default
10 Telephone/fax automatic
switchover time
11 Ring response time
12 Distinct ring
13 1’st cassette paper size