Oki OKIOFFICE84, Maintenance Manual

Page: 452 / 519

G - 3 40672201TH Rev. 4
2. Quick Set-up Manual for RMCS Model 30
This procedure should be used in conjunction with the main documentation supplied and is de-
signed only as a brief set up and operation procedure.
The set-up for the RMCS is from a PC to an FAX modem. This FAX modem unit is the CONTROL
or CENTER unit.
The receiving fax unit is connected to the control fax through the telephone line cables. This unit is
called the REMOTE unit.
Note: The REMOTE unit must have Remote Diagnosis set to ON (user function 21).
CONFIG.SYS in CENTER PC must have the following added
DEVICE = C:¥DOS¥ANSI.SYS
DEVICE = C:¥DOS¥EMM386.EXE
Items 2-1, 2-2 and 2-3 need only be carried out for the initial installation.
And Item 3 is need only for operator to treat the .BIN files i.e. Program, Default and Language files.
2.1 Installation of RMCS Disc
Insert the "SYSTEM DISC" into drive A and set PC for drive A:
A>INST enter (then INSTALL MENU will be displayed.)
Select item 1 (RMCS SETTING) from the menu
Hard disk drive= [c] enter
Directory = [c:¥RMCS_ ] enter
Password = [*******] type in password and press enter
Dipswitch enter (this is only for RMCS Model 10)
Are you sure Y enter
2.2 Installation of FAX Disc
Remove SYSTEM DISC from drive A and insert the "FAX DISC" (FX-048, FX-050VP or FX-
175VP).
Select item 2 (FAX SETTING) from the menu, then the message is displayed as below.
Fax Disk set
Push any key
(After pushing any key, the message will be added as below).
FX-050VP (for example)
Ver 02.00
Are you sure (Y or N) Y
enter (FAX DISC data will now be installed to the PC.)
2.3 Installation of PROGRAM/DEFAULT/LANGUAGE files
With the FAX DISC in drive A run the Binary File Manager program:
A>BFM enter (Then Binary File Manager MENU will be displayed.)
Select [0]: STORE FILE
Remove FAX DISC from drive A and insert a disc containing the .BIN files. Use the arrows key to
highlight the file to be stored and then press enter. Press ESC to return to the menu and then
terminate.