Oki OKIOFFICE84, Maintenance Manual

Page: 26 / 519

1 - 19 40672201TH Rev. 4
The transmitter sends a call-back message to the receiver
only when the receiver does not respond to voice request of
the transmitter.
The fax can transmit a programmed alphanumeric message,
such as company’s name, consisting of up to 32 characters.
* (Outside only)
Received TSI can be printed at the top of the received page.
* TF + 05 (To enable or disable this function)
The fax will automatically print out a power outage report
when the AC power is restored after the power fuilure.
The fax can print out an activity report manually, and provides
a record of your fax machine's last 30 communications. This
report does not contain the results of messages which were
received without errors. However it does contain messages
received in memory with or without errors.
* REPORT P1(Manual printout)
The fax can print out a message confirmation report manually
or automatically in the following cases.
(1) Manual print
By pressing the COPY key after a communication
(2) Automatic printout
When the FP+01 (to enable or disable automatic printing
after a communication) is set to Enable.
The fax can print out a broadcast entry report if specified
during operating sequence of a broadcast.
The fax can print out a broadcast confirmation report manu-
ally or automatically.
* COPY key (Manual printout): Pressed after a broadcast.
* REPORT PR 2 (Manual printout)
* FP +02 (To enable or disable automatic printing)
Table 1.6.1 (1/2) Reports and Lists Specifications
No. Item Specifications
1 Call-back message
2 Sender ID
3 Transmitting subscriber
identification(TSI) printing
4 Cancel report
(Power outage report)
5 Activity report
6 Message confirmation report
7 Broadcast entry report
8 Broadcast confirmation report
1.6 Reports and Lists
Table 1.6.1 shows Reports and Lists Specifications.
The described information for FAX2NET service referes to Appendix I "7. Report".
Note: F +OT: Press FUNCTION and One-touch key
FP:
Function program setting
TF: Technical function setting