Oki OkiLAN 6120e, User Manual

Page: 204 / 222

VI - 10
Section 6 - Chapter 2 - OkiLAN 6120e Setup for Windows 95/98
OKI OkiLAN 6120e User’s Guide
Chapter 2
OkiLAN 6120e Set Up for
Windows 95/98
Overview
This section contains instruction and information on
how to set up your OkiLAN 6120e for a Windows 95/
98 environment. Print options for Windows 95/98
include:
• OkiLAN 6120e Connect for TCP/IP
• OkiLAN 6120e Connect for DLC
• OkiLAN 6120e Connect for IPX/SPX
OkiLAN 6120e Connect for TCP/IP
OkiLAN 6120e Connect for TCP/IP is a full featured
utility that allows simple, direct, TCP/IP printing from
your computer to a printer attached to an OKI TCP/IP
enabled print server. With OkiLAN 6120e Connect,
you can even print to print servers using Dynamic IP
addresses (DHCP). Print jobs printed through OkiLAN
6120e Connect are sent directly to the OkiLAN 6120e
print server and not routed through the network server,
resulting in a reduction of network traffic.
System Requirements
To use OkiLAN 6120e Connect for TCP/IP, your
operating system must be Windows 95/98 and your
computer must be configured to run TCP/IP. The
OkiLAN 6120e print server must also be configured to
run TCP/IP.
Installation
To install OkiLAN 6120e Connect for TCP/IP:
1. Install the OkiLAN 6120e Connect for TCP/IP-see
Section I.
2. When installation is complete, click on Start,
Settings and then Printers.