Oki OkiLAN 6120e, User Manual

Page: 133 / 222

IV - 39
Section 4 - Chapter 4 - OkiNet for TCP/IP
OKI OkiLAN 6120e User’s Guide
TCP/IP
For example, if you currently have three columns
displayed and you wish to add a fourth column to the
far left of the screen, follow these steps:
1. Select the first column in the Columns Displayed
field.
2. Select the column to be added from the Columns
Available field.
3. Select Add.
Columns may also be removed by selecting Remove
from the Columns Available field.
Refresh
The refresh rate defines how often the OkiNet for TCP/
IP utility updates the main print server list. To define a
refresh rate, select Automatic Refresh and enter the
refresh rate in the field provided. Decide how
frequently to refresh the screen based on factors such
as network traffic and desire for most recent
information.
For example, if traffic on your network is not an issue
and the most current information is desired, set the
refresh rate to 1 so that the screen is updated every
minute.
If network traffic is an issue, you may wish to set the
refresh rate to 10. This would update the screen every
ten minutes and minimize network traffic.
Permanently Defining SNMP Access
Information
Access to OkiLAN 6120e configuration and diagnostic
information is determined by using community names.
The Special Options window is used to permanently
define access information so that it does not need to be
entered each time the OkiLAN 6120e is accessed. To
Get and/or Set information on the OkiLAN 6120e
through OkiNet for TCP/IP, community names must
match the community names assigned to the OkiLAN
6120e.