Oki OkiLAN 6120e, User Manual

Page: 140 / 222

IV - 46
Section 4 - Chapter 6 - Telnet Configuration
OKI OkiLAN 6120e User’s Guide
Note: If you select an invalid subnet mask you may
not be able to access the OkiLAN 6120e. Use
this option with care!
Identify Default Gateway IP Address (Option 5)
If your local network is attached to other networks, you
must specify the address of your default gateway.
Whenever packets need to be sent to another network,
the default gateway is used.
The gateway address must follow the format
XXX.XXX.XXX.XXX, where each XXX is a number
between 0 and 255.
When the default gateway is changed, it will remain
undetected until the OkiLAN 6120e is reset or is power
cycled.
Note: If you select an invalid default gateway or the
default gateway goes down, the OkiLAN
6120e may not be able to communicate with
non-local networks.
Configure Port (Option 6)
After the Configure menu appears, you can access the
following configuration option screens.
Specify Configuration Page Language
This option enables you to select how the OkiLAN
6120e configuration pages should be printed: Text
(default), PCL, PostScript, or OFF.
Configure Language Switching
This option asks you to select the language of your
printer. For a description of language switching
options, see pages IV-28 and IV-29.