Oki OkiLAN 6120e, User Manual

Page: 198 / 222

VI - 4
Section 6 - Chapter 1 - OkiLAN 6120e Setup for Windows NT
OKI OkiLAN 6120e User’s Guide
Installation
To install OkiLAN 6120e Connect for TCP/IP, follow
the instructions below:
1. Install the OkiLAN 6120e Connect for TCP/IP files -
see Section I.
2. When installation is complete, click on Start,
Settings and then Printers.
3. Select the Windows printer from which you would
like to print with the OkiLAN 6120e Connect, then
select Properties from the menu.
4. Add an OkiLAN 6120e Connect port. This may be
done by selecting Add Port under the Ports tab.
5. From the list of Available Printer Ports, select OKI
OkiLAN 6120e Connect IP Monitor as the type of
port to add and click New Port.
You will enter into the Add OkiLAN 6120e Connect
Port screen where there will be a list of all OkiLAN
6120e print servers available on the local subnet.
6. If the port you wish to add is listed in the Ports
available on local subnet: window, select the port
name and click Add.
If the port you wish to use is not listed, click the
Locate non-local device button and enter the Static
IP Address used for the print server. Click the Add
button.