Page: 74
Service Manual for OF5800
Chapter 3 Adjustment Procedures
Bit
Initial Setting
Adjustment
Usage / Comments
7
0
EYE-Q slice level
0: Disable
1: Enable
Setting this bit to "1" enables memory switch
D:2,bits 0-3 and memory switch D:1, bits
0-7, and enables EYE-Q check Adjustment.
6
1
Check EYE-Q
0:No
1:Yes
0: Line condition status (EYE-Q) is not
checked after checking TCF.
1: Line condition status (EYE-Q) is checked
after checking TCF.
5
0
Factory use only.
4
0
Factory use only.
3
1
2
0
EYE-Q check level at 2400
bps
1
1
0
0
EYE-Q check level at 4800
bps
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
