42114101 Rev.1
70 /
A
1
Lock A
2
3.3.13 LF Motor
(1)
Remove the printhead (see 3.3.1).
(2)
Remove the ribbon protector (see 3.3.2).
(3)
Remove the pull-up roller Assy (see 3.3.3).
(4)
Remove the upper cover (see 3.3.4 (1) – (5)).
(5)
Remove the platen Assy (see 3.3.11).
(6)
Remove the driver board (see 3.3.12).
(7)
Remove the left FG plate
1
.
(8)
Release the lock A to remove the LF motor
2
.
(9)
To install, follow the removal steps in the reverse order.
Remark on assembly:
(1)
Press the LF Motor Cable with a portion
A
of the Motor Plate.
Summary of Contents for ML490 Series
