42114101 Rev.1
35 /
2.2.3 Head gap adjusting (See Figure 2-5.)
The head gap adjusting lever moves back and forth to tilt the carriage frame, altering the gap
between the printhead and the platen.
The adjusting screw, which is connected to the adjusting gear rotates when the adjusting lever
is moved creating a fine gap adjustment. If the adjusting gear is pushed down, the adjusting
screw can be turned with a screw driver to change the coarse gap adjustment.
When the adjusting lever is set to range
➁
~
➄
the contact which is attached to the under side
of the carriage cover will connect with the contact of the space motor PC board. The printer
will reduce the printing speed automatically to ensure that adequate printing pressure is maintained
for multipart paper.
And, the adjusting cam adjusts the headgap toward left and right side in accordance with the
guide rail up and down as a position of the left end of it.
Summary of Contents for ML490 Series
