42114101 Rev.1
79 /
3.3.22 Switch Lever
(1)
Remove the upper cover (see 3.3.4 (1) – (5)).
(2)
Remove the Control/Power Supply Board. (see 3.3.15).
(3)
Remove the change lever and gears (see 3.3.17).
(4)
Remove the paper pan (see 3.3.19).
(5)
Remove the rear pressure assy (see 3.3.21).
(6)
Pull the Switch Lever toward you and remove it upward.
(7)
To install, follow the removal step in the reverse order.
Remark on assembly:
(1)
At the time of the Switch Lever assembly, make sure that the Micro switch on the
Power Supply Board works properly.
Micro switch
Switch lever
Switch lever
Summary of Contents for ML490 Series
