- 79 -
Scanning to Computer
4
Scanning
3
Plug one end of the Ethernet cable into
the network interface connection on the
back of the machine.
4
Plug the other end of the Ethernet cable
into the hub.
5
Hold down the power switch for
approximately one second to turn on the
power.
Connecting using wireless LAN
(MC342dw, MC362w, MC562w, MC562dw,
ES5462dw MFP, MPS2731mc only):
Use the WPS (push button) function to set the
wireless LAN. For details on other methods
for setting the wireless LAN, refer to the
Configuration Guide.
1
Press the <SETTING> key on the operator
panel.
2
Press the to select [Wireless Setting],
and then press the .
3
Log in by entering administrator password
of the device.
Use
, , ,
key to select letter and then
press
OK
.
Default administrator password is “aaaaaa”.
The message below will be displayed for
about 5 seconds.
4
Check that [Automatic setup (WPS)]
is selected, and then press the .
5
Press the to select [WPS-PBC], and
then press
OK
.
