manualshive.com logo in svg

Oki C931 DICOM, User Manual, Page: 159 / 336

Share
Download
Oki C931 DICOM User Manual Download Page 159

- 159 -

Matching Colors Using Utilities

4

3

5

1

2

Con

ven

ient print 

functions

Appendix

Index

Checking a

nd 

 

Cha

nging Printer  

Settings Using 

 

the Control P

anel

Network 

Setup

Matching 

Colors

Using Utilit

y 

Softw

are

Memo

 

z

The overall brightness can be adjusted using the 

gamma slide bar, and the output colors adjusted 

using the hue/brightness slide bars.

 

z

The further to the left the [Gamma] is adjusted, 

the brighter the image.

 

z

The matched colors can be switched using the 

printer color buttons.

 

z

Adjust the [Hue] for each color either clockwise 

(+) or counterclockwise (-) in the color circle. 

For example, moving the Y (yellow) slide bar 

clockwise (+) the color approaches G (green), 

and moving the bar counterclockwise (-) the 

color approaches R (red).

C(Cyan)

R(Red)

Y(Yellow)

G(Green)

B(Blue)

M(Magenta)

(+)

(-)

 

z

[Use printer's unadjusted color.] adjusts so that 

the 100% of the primary toner colors are used. 

Enable this check box to anchor the [Hue] slider 

bar for the relevant color, and adjust so that 

printing arranges the toners as described below.

Printer 

Colors

Result

Cyan (C)

Cyan toner 100%

Magenta (M) Magenta toner 100%
Yellow (Y)

Yellow toner 100%

Red (R)

Magenta toner 100% + Yellow toner 100%

Green (G)

Cyan toner 100% + Yellow toner 100%

Blue (B)

Cyan toner 100% + Magenta toner 100%

(6) 

Click [Print Palette].

"TEST PRINTING SAMPLE" will be printed.

(7) 

Check the adjusted results.

If the desired match results have not 

been obtained, repeat Steps (5) and (6).

(8) 

Click [Next].

(9) 

Enter a name for your Color 

Settings and click [Save].

(10) 

Click [OK].

Note

 

z

If updating or reinstalling the printer drivers, when 

the Color Correct Utility is started, the matched 

color names that have been created will be read 

again. Check that the matched color name is 

displayed in [Setup Selection], and click [Finish].

(11) 

Click [Finish] to finish the Color 

Correct Utility.

Summary of Contents for C931 DICOM

















































































































































































































































































































































Reviews:

No comments