Oki C330dn Maintenance Manual Download Page 72

Page: 72 / 220

44346001TH Rev.1

7 /

Oki Data CONFIDENTIAL

4.REPLACEMENT OF PARTS

4.2.18 Frame-MPT assembly and feeder assembly

(1) Remove the left side cover, the right side cover, the rear cover, the hopping motor,

the plate shield assembly, the operator panel assembly, the cover-open switch and

the frame-MPT-side.

(2) Remove the RGSNS, HPSNS and MPC cables of the PU/CUPCB.

(3) Remove the two (silver-colored) screws

①

to remove the plate-front

②

(4) Remove the two (silver-colored) screws

③

and the (black) screw

④

and unlatch the

two portions to detach the frame-MPT assembly.

(5) Remove the three (silver-colored) screws

⑥

to detach the feeder assembly

Summary of Contents for C330dn





























































































































































































































Search results

Summary of Contents for C330dn

Reviews:

Related manuals for C330dn

Brands by name

Popular brands

Oki C330dn, Maintenance Manual

Search results

Summary of Contents for C330dn

Reviews:

Related manuals for C330dn

Brands by name

Popular brands