Oki C330dn Maintenance Manual Download Page 122

Page: 122 / 220

44346001TH Rev.1

1 /

Oki Data CONFIDENTIAL

6. PERIODIC MAINTENANCE

6.3 Pick-up roller cleaning

The pick-up rollers should be cleaned when a printed surface contains a vertical line.

Note! Use a soft cloth for cleaning so as not to damage the roller surfaces.

Feed roller and separator roller cleaning

The feed rollers and the separator roller should be cleaned when 391: PAPER JAM frequently

occurs.

(1) Pull out the paper cassette.

(2) Wipe the (large and small) feed rollers with a cloth tightly wrung out with water.

(3) Wipe the separator roller of the paper cassette with a cloth tightly wrung out with

water.

Feed roller (small)

Feed roller (large)

Roller

Note! • Clean the (option) tray 2 in the same way when 392: PAPER JAM frequently

occurs.

• Clean the feed roller of the multi-purpose tray in the same way when 390:

PAPER JAM frequently occurs.

Summary of Contents for C330dn





























































































































































































































Search results

Summary of Contents for C330dn

Reviews:

Related manuals for C330dn

Brands by name

Popular brands

Oki C330dn, Maintenance Manual

Search results

Summary of Contents for C330dn

Reviews:

Related manuals for C330dn

Brands by name

Popular brands