Oki C330dn Maintenance Manual Download Page 39

Page: 39 / 220

44346001TH Rev.1

3 /

Oki Data CONFIDENTIAL

3. INSTALLATION

(4) Load the paper with the print side facing down.

Note! • Place the paper against the front side of the paper cassette.

• Do not allow the level of paper to pass the “ ” mark of the paper guide (530

sheets of 70 kg paper).

(5) Hold the paper with the paper guide.

(6) Turn the paper size dial to the size of the paper loaded.

(7) Insert the paper cassette back into the printer.

Place the print side
facing down.

mark

Paper loading orientation

Loading paper in the multi-purpose tray

(1) Open the multi-purpose tray and also the paper supporter.

マルチパーパストレイ

手差しガイド

用紙サポータ

手差しガイド

マルチパーパストレイ

(2) Move the manual feed guide to the paper size.

(3) Align the edges of the paper stack.

Summary of Contents for C330dn





























































































































































































































Search results

Summary of Contents for C330dn

Reviews:

Related manuals for C330dn

Brands by name

Popular brands

Oki C330dn, Maintenance Manual

Search results

Summary of Contents for C330dn

Reviews:

Related manuals for C330dn

Brands by name

Popular brands