44346001TH Rev.1
130 /
Oki Data CONFIDENTIAL
7. TROUBLESHOOTING
Panel display ( identifies
that no display is provided)
On-
line
lamp
Atten-
tion
lamp
Detail
Solution
C M Y K
On
Off
Indicates toner gages.
CALIBRATING
Varies Varies Indicates toner TAG is being checked.
ADJUSTING TEMP
Varies Varies Indicates the printer is warming up.
−
OPTIMIZING TEMP
Varies Varies Indicates that: the printer temporarily
stops printing as an image drum is hot; or
it is in a wait state for a thermal measure
with change from narrower to wider
paper.
−
POWER SAVE
Varies Varies Indicates the printer is in a power saving
state. The printer turns off the LCD
backlight simultaneously with entering
a power saving mode and, after exiting
the mode, turns on the backlight. When
a button is pressed with the backlight not
lighting (during a power saving mode),
the printer turns on the backlight and,
after 30 seconds, turns off it, where the
printer does not exit the power saving
mode. While shutting down, the printer
stays the backlight lighting.
−
ADJUSTING COLOR
Varies Varies Indicates the printer is performing auto
color registration adjustment.
−
ADJUSTING
DENSITY
Varies Varies Indicates the printer is performing auto
density adjustment. The status code
10988 corresponds to density reading
and the status code 10994 corresponds
to density adjustment.
−
PU DOWNLOADING
Varies Varies Indicates PU firmware program data
is being downloaded. PU firmware
downloading is transparent to users,
and this status occurs in no user
environments.
−
Warning
Panel display ( identi-
fies that no display is
provided)
On-
line
lamp
Atten-
tion
lamp
Detail
Solution
ORDER %COLOR%
TONER
Varies
On
(Blink)
(Off)
Indicates that the printer is low on toner,
or a waste toner near-full warning. With
MENU-SYS CONFIG MENU-"SYS
CONFIG MENU"-"LOW TONER"=STOP,
the printer flashes the attention LED,
going offline. When the ONLINE button
is pressed, or the printer has an error
and the error is cleared, the printer
goes online and, until TONER EMPTY,
continues printing. With MENU-
SYS CONFIG MENU-"SYS CONFIG
MENU"-"LOW TONER"=STOP, when
the printer is in the TONER LOW state
when turned on, the printer flashes
the attention LED at completion of
initialization, going offline. Pressing the
ONLINE button makes the printer still
able to perform printing until TONER
EMPTY. With ADMIN MENU-CONFIG
MENU-NEARLIFELED set to DISABLE,
the printer stays the attention LED
turned off.
−
%COLOR% WASTE
TONER FULL.
REPLACE TONER
Varies
On
A warning, which is displayed by cover
opening and closing, or turning off and
on the printer, after a toner-full error
occurs once. The printer displays this
warning and the first row’s message
in combination. While providing this
display, the printer has a waste toner-full
error every time printing approximately
50 pages, going offline and stopping.
%COLOR%
K
Replace the
toner cartridge
for the displayed
color.
NON OEM %COLOR%
TONER DETECTED
Varies
On
Indicates a toner cartridge is not for the
printer.
%COLOR%
Y
M
C
K
Ask the
customer to use
a proper part.
